WELLCARE OIL TOOLS PRIVATE LIMITED

‘X’ LANDING NIPPLES & LOCK MANDREL

MODEL: WC-LNP-WX, PRODUCT No.: WC-41405 MODEL: WC-LM-WX, PRODUCT No.: WC-41412 Landing nipples are run into the well on the completion […]

‘XN’ LANDING NIPPLE & LOCK MANDREL

MODEL: WC-LNP-WXN , PRODUCT No.: WC-41406 MODEL: WC-LM-WXN , PRODUCT No.: WC-41414 Landing nipples are run into the well on […]

TUBING RETRIEVABLE SAFETY VALVE

MODEL: WC-TRSV PRODUCT No.: WC-41422 Tubing Retrievable Surface Controlled Sub Surface Safety Valves form part of production string. Hydraulic control […]

SURFACE CONTROLLED SUBSURFACE SAFETY VALVES

MODEL: WC-SSSV PRODUCT No.: WC-41421 Surface Controlled Subsurface Safety valves are installed in the upper wellbore to provide emergency closure […]

SEPARATION SLEEVE

MODEL: WC-SSVS PRODUCT No.: WC-41420 WELLCARE Separation Sleeve, when attached to an appropriate lock is a wire-line retrievable tool, used […]

SAFETY VALVE LANDING NIPPLE

MODEL: WC-SVLNP PRODUCT No.: WC-41419 Safety Valve Landing Nipples are used to accommodate WELLCARE model Wireline retrievable sub surface safety […]

‘R’ PULLING TOOL

MODEL: WC-PTR PRODUCT No.: WC-41418 The “WC-R” Pulling Tool is a wireline service tool designed to remove retrievable subsurface devices […]

‘C1’ RUNNING TOOL

MODEL: WC-C1 PRODUCT No.: WC-41704 The model ‘WC-C1’ running tool runs flow Control devices into the well those have external […]

‘X LINE’ RUNNING TOOL

MODEL: WC-RTX PRODUCT No.: WC-41402 The ‘X Line’ Selective Running Tool is designed to install subsurface control equipment using a […]

‘A’ RUNNING TOOL

MODEL: ‘RTA’’ PRODUCT NO: WC-41702 The Wellcare RTA Running Tool, is used to run and set all Wellcare Locks. It […]

GR’ PULLING TOOL

MODEL: WC-PTGR PRODUCT No.: WC-41417 A shear up adapter is available for converting a ‘GS’ Type Pulling Tool into ‘GR’ […]

‘GS’ PULLING TOOL

MODEL: WC-PTGS PRODUCT No.: WC-41404 The Model: WC-GS Pulling Tool is a wireline service tool designed to retrieve flow control […]

‘S’ PULLING TOOL

  MODEL: WC-PTS PRODUCT No.: WC-41401 The ‘S’ Pulling Tool is a wireline service tool designed to remove retrievable subsurface […]

‘RPT ‘LANDING NIPPLE

MODEL: WC-LRPT PRODUCT NO.: WC-60209 RPT  landing nipples are run into the well on the completion tubing to provide a […]

‘RN’ LANDING NIPPLES & LOCK MANDREL

MODEL: WC-LNP-WRN [Bottom No-Go] PRODUCT No.: WC-41408 MODEL: WC-LM-WRN PRODUCT No.: WC-41415 Landing nipples are run into the well on […]

‘R’ LANDING NIPPLE & LOCK MANDREL

MODEL: WC-LNP-WR , PRODUCT No.: WC-41407 MODEL: WC-LM-WR , PRODUCT No.: WC-41413 Landing nipples are run into the well on […]

EQUALIZING CHECK VALVES-N

MODEL: WC-ECV-N [Run in all Model: WC-LNP- WXN & WC-RLNP Landing Nipple PRODUCT No.: WC-23416 Equalizing Check Valves are complete […]

EQUALIZING CHECK VALVES

MODEL: WC-ECV [Run in all Model: WC-LNP-WX & WC-FLNP Landing Nipple & L Sliding Sleeve] PRODUCT No.: WC-23417 Equalizing Check […]