MODEL: WC-HPSR-6

PRODUCT NO.: WC-25403


The WELLCARE Hydraulic Set high Angle Straight pull or Rotational Release Production Packer WC-HPSR-6 is compact, economical, packer designed for low to medium-pressure applications. The short Body length makes it ideal for tight radius deviations and Horizontal applications. The packer requires no movement for setting, allowing stacked applications. Straight Pull OR Rotation releases the packer and built-in by pass ports equalize pressure across the packer for ease in retrieval. The shear Release mechanism is isolated from the packer hydraulics to allow Low release force even at full pressure differential.


Features

  1. No mandrel movement for setting.
  2. Low setting pressure
  3. Straight pull Release or Rotational Release.
  4. Shear screw isolated from hydraulic pressur
  5. Short in length.
  6. Pressure differential rating 10,000 psi
  7. Tested in Q125 casing.

Benefits

  1. Low shear out force required, even at full pressure differential.
  2. Economical design makes packer easy to redr
  3. May be set with rig pump
  4. Stacked packer installations with sequential setting.

Application

  1. Offshore oil and gas application
  2. Highly deviated wells and severe dogleg
  3. Stacked-packer completion
  4. Coiled-tubing completion.

 

WC-HPSR-6
WC-HPSR-6

CASING

PACKER

SIZE IN./mm

WEIGHT
LB/FT

MIN. SETTING PRESSURE (PSI/bar)

a PACKING ELEMENT ELASTOMER

MAX. OD (IN./mm)

MIN. ID (IN./mm)

TOTAL
LENGTH
(APPROX)
(in)

b End
Connection

4 ½”  114.3

9.5-13.5

  2,200
151.72

90-70-90

3.771   95.78

1.890 48.00     or
1.995
50.67

61.000

b2 3/8 EU Box Up X Pin down

5”
127

15-18

4.125
104.77

11.5-15

4.250
107.95

5 ½”
139.7

13-15.5

2,400
165.51  

4.781
121.43

1.995
50.67     or
2.441
62.00

67.000

b2 3/8 EU Box Up X Pin down
or
b2 7/8 EU Box Up X Pin Down
or
b3 1/2 EU Box Up X
Pin Down

14.0-20.0

4.625
117.47

20.0-23.0

4.540
115.316

6 5/8”
168.25

24.0-28.0

5.688 144.47

20.0-24.0

5.791
147.09

7”
177.80

20.0-26.0

6.000
152.40

2.441
62.00
Or
2.990
75.94

62.500

26.0-32.0

5.891
149.63

32-35

5.817
147.8

7 5/8”
193.67

33.70-39

6.453   163.90  

24-29.7

6.672 169.47

   9-5/8”
244.48

36 - 43.5

8.531
216.69

2.990
75.94

73.125

b3 1/2 EU Box Up X
Pin Down

40-47

8.437    214.299

47.0-53.5

8.281
210.34


a Grades of elastomer vary as per well environment, pressure, temperature ratings and sour service conditions.

b Thread connections at both ends are furnished as per requirement or customer demand.


 Setting Procedure.

Run in the hole to setting depth (Running speed should not exceed 90ft/min.) The Wellcare WC-HPSR-6 packer is set by temporarily plugging the tubing string blow the packer and applying pressure {Adjusted prior to running in (see parts list for release shear values inside the tubing. The tubing may be plugged dropping a ball to in the expandable seating sub run below the packer or by running a wire line plug to seat in a profile nipple or sliding sleeve run below the packer.

In installing where the Wellcare WC-HPSR-6 is run in tandem, one temporary plug run below the bottom packer is all that is required to set the packers. Pressurize the tubing will set all the packers simultaneously, or by adjusting the setting shear valve of each packer, the packers can be set individually.


Releasing Procedure

The Wellcare WC-HPSR-6 packer is released by straight pickup on the tubing string or Rotating the tubing string. Tension force required to release the packer is easily adjusted prior to running in.

 

Leave a Reply

Your email address will not be published. Required fields are marked *