MODEL: WC-HSDDPL, 

PRODUCT NO.: WC-20404


The Model -HSDDPL Hydraulic Set Large Seal Bore Drillable Packer are hydraulically set versions of the WC-WSSDP Packer. WC-HSDDP Model has an enlarged upper seal bore, which permits the maximum possible bore through the seal accessory which is latched into the packer. These Packers incorporate maximum strength, uniformity of setting pressure, standardization of materials and a one-piece body.
The range of bore sizes offered is such that accessories which are used for WC- HSDDPL series of Packers may be used with the WC- HSDDPL Packers.
The Large Bore Packers are made in sizes which enables them to use the range of accessories which is available for drillable series of Packers. They have a lower pressure rating because of the increased bore size.  The hydraulic setting mechanism makes Packers particularly suitable for use in highly deviated wells. Careful choice of materials for components, which are exposed to the well fluids, enables the packers to be used in a wide range of operating conditions.


Features and Benefits

  • Solid, slim lined construction and a packing element system which resists swab-off. This permits a fast run-in (when compared with earlier models of permanent packers) without fear of impact damage or premature setting, yet packs off securely and permanently when the packer is set.
  • Two opposed sets of full circles; full strength slips ensure that the packer will stay where it is set.
  • Interlocked expandable metal back-up rings contact the casing and create a positive barrier to packing element extrusion.
  • Setting requires no rotation or reciprocation, thereby eliminating the problems of spacing out, landing etc.
  • The WC- HSDDPL Packer is run with Anchor Seal Nipples or WC-STNE-1 Setting Tool Nipple.
  • All O-Rings which separate casing and annulus pressures are supported by back-up rings to improve long term seal integrity.
  • All Packers are designed to withstand pressure differentials up to10, 000 psi.
  • Guide furnished as standard, allowing the attachment of a mill out extension or other equipment below the packer.
  • All alloy materials within the packer are suitable for H2S service.
  • Can be furnished with Kalrez O-Rings for severely corrosive environments.
  • Body & Guide (components in flow paths) can be furnished in customer’s choice of material
  • Fluid displacement is possible after well is flanged up and prior to setting the packer
  • Setting sequence of packer may be controlled to start at 1,500 psi
WC-HSDDPL
WC-HSDDPL

Features and Benefits Operating Procedure Running In and Setting

The Models WC-HSDDP has an enlarged upper seal bore and a Left-hand Square thread in the upper end of the packer’s body. Anchor Tubing Seal Assembly will latch into the upper end of the Packer body to attach the Packer to the tubing string, and give a uniform, smooth bore through the packer and anchor. Any tail pipe assembly is attached to the lower end of the packer.
A plugging device must be positioned below the packer, so that tubing pressure can be applied to set the packer.
Suitable plugging devices are:
a) Shear-out Ball Seat Sub
b) Hydro-Trip Pressure Sub
c) A wire line blanking plug seated in a suitable Landing nipple.

Run the packer to depth, and drop in the tripping ball or run the wire line plug as appropriate and apply the setting pressure to the packer. Hold the pressure for ten minutes and either pump out the tripping ball or retrieve the wire line plug.

SPECIFICATION GUIDE, MODEL WC-HSDDPL


CASING

                 PACKER

PACKER SEALING BORE

Upper

Lower

OD

Weight

ID Range in which Packer may be run

     Size

OD

 

LENGTH

Seal
Bore

Seal Assembly Size

Min Bore Thru Seals

Seal
Bore

Seal Assembly Size

Min
Bore Thru Seals

Min

Max

(approx.)

in. mm

Lbs./ft.

in. mm

in. mm

in. mm

in.

in. mm

in. mm

in. mm

in. mm

5
127.00

15-21

4.125
104.8

4.436
112.7

32-30x24

3.968
100.79

55.875

3.000
76.20

20-30

2.390
60.71

2.400
60.96

Non-Sealing Bore

5-1/2
139.70

20-23

4.625
117,5

4.811
122,2

43-36x27

4.450
113,0

3.625
92,1

43-36

2.780
70.,6

2.780
70,6

6-5/8
168,3

17

6.095
154,8

6.276
159,4

85-47x38

5.875
149,4

4.750
120.6

81-47

3.875
98.4

3.875
98.4

120-38

2.500
63.5

7
177.8

20-23

6.277
159.4

6.456
164.0

87-47x38

6.000
152.40

4.750
120.65

23-32

6.095
154,8

6.366
161.7

85-47x38

5.937
150.8

4.750
120.6

32-38

5.875

6.094

83-47x38

5.687
144.4

83-47x3.95 (a)

3.958NonSealingBore

7-5/8
193.7

24-33.7

6.706
170.3

7.025
178.4

91-47x38

6.500
165.1

58

3.875
98.4

120-38

2.500
63.5

8-5/8
219.8

24-36

7.812
198.4

8.150
207.9

128-60x47

7.500
190.5

62

6.000
152.4

190-60

4.875
123.0

4.750
120.6

190-47

3.000
76.20

10-3/4
273.0

32.15-60.7

9.660
245.4

10.192
258.9

214-73x60

9.437
239.7

68

7.500
190.5

190-73

6.000
152.4

190-60

4.875
123.8

 

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *